CL Series

2017-03-25
service content:


Product overview:
CL series cone type vacuum pump adopts the structure of suction and exhaust cone distributor, and plane type vacuum pump axial suction and exhaust than suction and exhaust passage area, small flow resistance, dry air energy saving about 18%, pumping saturated steam when saving about 28%. And both ends of the impeller closed, rigid good.
Common working conditions of CL series vacuum pumps:
When there is an excess liquid
Any vacuum pump is designed to consider the treatment of gases, such as air. Many types of vacuum pumps compress the gas from the lower pressure to the normal pressure of the outlet, but very few can handle the "wet vacuum", which can be harmful if a large amount of liquid is pumped into the pump with the gas.
But the liquid into the CL type vacuum pump without damage, whether it is occasionally into mud or drop into the long term, can be accepted by the pump and the pump, the ability is not affected, there are many ways to recover if needed into liquid. 
When the gas contains solid particles
CL type vacuum pump also allows the entry of solid particles into the, of course, abrasive and large solid particles are not within the scope of this solid. Because the abrasive will shorten the service life of the pump, the large solid particles will cause damage to the pump, they need to filter out. However, CL vacuum pump allows other solids into the vacuum pump, which is also an important reason for the selection of such vacuum pump.
For example, the vacuum line paper mill will appear paper fiber, coating device for textile factory must deal with textile fiber in the vacuum system of many chemical, pharmaceutical, food industry, often containing paste or soft objects, similar problems exist in the application of CL vacuum pump successful occasion.
When the gas is corrosive
Many factors contribute to the corrosion resistance of CL vacuum pump. First of all, there is no need to lubricate the pump components, so do not take into account the destruction of chemical reagents and emulsion lubricants, and there are a lot of ways to protect the pump from chemical corrosion.
One method is to select a working fluid to react with the gas, and the other is to select a neutral liquid relative to the corrosive gas to protect the metal part of the pump by diluting the corrosive gas.
When steam is recycled
The vacuum gas treatment systems often need to be recycled, rather than into the atmosphere, mainly because the gas is the production of products or are recycled, sometimes we must recycle explosive, poisonous gas to avoid air pollution and stimulation.
The CL vacuum pump can be used as a condenser when the gas is in the vacuum state. The condensed liquid cooling in heat exchanger is the working liquid pump, some of them can work in the pump suction fluid before the spray into the pump, the saturated steam is condensed before the import, it not only improves the pump ability but also improve the efficiency of the pump.
When you need stable operation
Because the CL vacuum pump is operated without a pressure pulse, the buffer tank is not needed. On the other hand, its stability is due to the mechanical operation of the pump, he only has a rotating component that is the balance of the rotor, which means saving equipment installation and basic costs.
When you need reliability

CL型真空泵常用在不定期的关机保养每小时耗费数万元的场合,在许多装置中,他们不需要备件,也不需要备泵。他的可靠性还体现在他的极低的维修费用上。

泵内不含阀门、旋片、活塞、齿轮,通常的密封垫和减磨轴承在外部连接,材质和设计已经得到充分的证实,制造工艺也是最先进的,我们每一台泵出厂前都经过了严格的测试,因此在您的用过程中可以完全信赖他。

 

 

二、工作原理:

  

 

                               Product overview:

CL series cone type vacuum pump adopts the structure of suction and exhaust cone distributor, and plane type vacuum pump axial suction and exhaust than suction and exhaust passage area, small flow resistance, dry air energy saving about 18%, pumping saturated steam when saving about 28%. And both ends of the impeller closed, rigid good.
Common working conditions of CL series vacuum pumps:
When there is an excess liquid
Any vacuum pump is designed to consider the treatment of gases, such as air. Many types of vacuum pumps compress the gas from the lower pressure to the normal pressure of the outlet, but very few can handle the "wet vacuum", which can be harmful if a large amount of liquid is pumped into the pump with the gas.
But the liquid into the CL type vacuum pump without damage, whether it is occasionally into mud or drop into the long term, can be accepted by the pump and the pump, the ability is not affected, there are many ways to recover if needed into liquid.
When the gas contains solid particles
CL type vacuum pump also allows the entry of solid particles into the, of course, abrasive and large solid particles are not within the scope of this solid. Because the abrasive will shorten the service life of the pump, the large solid particles will cause damage to the pump, they need to filter out. However, CL vacuum pump allows other solids into the vacuum pump, which is also an important reason for the selection of such vacuum pump.
For example, the vacuum line paper mill will appear paper fiber, coating device for textile factory must deal with textile fiber in the vacuum system of many chemical, pharmaceutical, food industry, often containing paste or soft objects, similar problems exist in the application of CL vacuum pump successful occasion.
When the gas is corrosive
Many factors contribute to the corrosion resistance of CL vacuum pump. First of all, there is no need to lubricate the pump components, so do not take into account the destruction of chemical reagents and emulsion lubricants, and there are a lot of ways to protect the pump from chemical corrosion.
One method is to select a working fluid to react with the gas, and the other is to select a neutral liquid relative to the corrosive gas to protect the metal part of the pump by diluting the corrosive gas.
When steam is recycled
The vacuum gas treatment systems often need to be recycled, rather than into the atmosphere, mainly because the gas is the production of products or are recycled, sometimes we must recycle explosive, poisonous gas to avoid air pollution and stimulation.
The CL vacuum pump can be used as a condenser when the gas is in the vacuum state. The condensed liquid cooling in heat exchanger is the working liquid pump, some of them can work in the pump suction fluid before the spray into the pump, the saturated steam is condensed before the import, it not only improves the pump ability but also improve the efficiency of the pump.
When you need stable operation
Because the CL vacuum pump is operated without a pressure pulse, the buffer tank is not needed. On the other hand, its stability is due to the mechanical operation of the pump, he only has a rotating component that is the balance of the rotor, which means saving equipment installation and basic costs.
When you need reliability

 

 

dehumidification
Textile from the washing pool is wet, and through the slotted tube, NASH CL type vacuum pump from the extractor will moisture and a large amount of air, to keep the vacuum system continuously, any textile fiber into the mixture will not cause problems, it can be with regular cleaning and removing separator.

n  Condenser vacuum

The vacuum keeping associated with extraction and non condensable gas amount in high vacuum, vacuum pump and CL NASH air jet pump used in series, in low vacuum, automatic injector as a bypass, CL vacuum pump suction gas directly from the condenser, compared with steam injection system, NASH initiation and maintenance operation can automatically switch, and the steam injection system need manual.

 

 

 

Four, the overall size chart

  

Five, unit matching table

 

 

型号

工作区间
(绝压mbar)

气量范围
(m³/min)

电机功率
(kw)

泵转速
(r/min)

备注

CLA—701

800~400

18~17

30

980

电机与泵直连

CLA—702

450~240

19~18

37

980

电机与泵直连

CLA—703

270~80

17~13

37

980

电机与泵直连

CLA—1001

800~400

27~25

45

740

电机与泵直连

CLA—1002

450~240

26~24

45

740

电机与泵直连

CLA—1003

270~80

24~16

45

740

电机与泵直连

CLA—2001

800~400

58~56

90

590

电机与泵直连

CLA—2002

450~240

56~52

90

590

电机与泵直连

CLA—2003

270~80

55~45

90

590

电机与泵直连

CLA—3001

800~400

85~80

132

500

皮带或减速机

CLA—3002

450~240

82~78

132

500

皮带或减速机

CLA—3003

270~80

80~68

132

500

皮带或减速机

CLA—4001

800~400

115~110

185

400

皮带或减速机

CLA—4002

450~240

110~100

185

400

皮带或减速机

CLA—4003

270~80

105~85

185

400

皮带或减速机

CLA—6001

800~400

170~165

200

300

皮带或减速机

CLA—6002

450~240

165~158

200

300

皮带或减速机

CLA—6003

270~80

155~130

200

300

皮带或减速机


Overview: The liquid ring vacuum pumps and compressors of......
Product Information Product Description Overview: 2BV ser......
Product Information Overview: SZ series liquid ring vacuu......
Overview: The liquid ring vacuum pumps and compressors of......
More cases
HOME | ABOUT US | PRODUCTS | QUALITY | TECHNOLOGY | CUSTOMER | CONTACT US
分享按钮